First, what is the thickness of the cut? Generally speaking, laser cutting is recommended to cut carbon steel up to 12mm and stainless steel up to 6mm. There is a misunderstanding that needs to be corrected. The cut thickness of laser cutting is not a high quality cut thickness. What does it mean? For example, the cutting thickness is 16mm, that is, the machine can cut 16mm, but it is not suitable for long-term cutting of 16mm. Just like the maximum speed of a car is 200 yards, it cannot run 200 yards directly, which will affect the life of the machine.
Secondly, regarding the width, in fact, the mainstream in the market is 3015, which is 3 meters by 1.5 meters. The width is not a problem. Generally, companies have many widths for customers to choose.
Then, regarding the degree of burr, this is actually a concern of customers. Generally speaking, solid yag has a little burr, which is mainly determined by the cutting thickness and the gas used. Generally, there is no burr below 4mm, the gas nitrogen effect is better, the oxygen effect is the second, and the air effect is poor. The advantages of metal laser cutting are on thin plates. If you want to cut thick plates, it is recommended to choose CO2 cutting machine and water cutting. Also, if you want less burrs, you can choose a fiber laser cutter, which cuts very smooth and fast.
About the configuration of the laser cutting machine. With the development of the laser industry, there are more and more brands of laser cutting machines, the prices are becoming more and more chaotic, and the configuration of the machinery is also deviated. Many manufacturers ignore customers under the brand name. Here, I want customers to pay attention to the core part of laser cutting: whether the laser and laser head are imported or domestic, brand or non-brand. At the same time, other components of laser cutting, such as whether the motor is imported servo motor, guide rail, bed, etc., affect the cutting accuracy of the machine to a certain extent. A special point to pay attention to is the cooling system of the laser cutting machine - the cooling cabinet. Many companies directly use household air conditioners for cooling. In fact, everyone knows that this effect is very bad. A better way is to use industrial air conditioners. A dedicated machine can achieve better results.